Dental Research Today is a free monthly online journal that collates and summarizes the latest research about Dental, including details on implants, health, hygiene, cosmetic, dentistry.

Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns.

Kim JW, Bhowmick S, Hermann I, Lawn BR

Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8500, USA.

This study examines the behavior of cracks approaching interfaces in all-ceramic dental crown-like bilayers. Flat specimens are fabricated by fusing porcelain veneers onto yttria-tetragonal-zirconia-polycrystal (Y-TZP) and alumina core ceramic plates, with veneer/core matching to minimize residual thermal expansion mismatch stresses. Vickers indentations are placed on either side of the interfaces, at systematically decreasing distances, so that the lead corner cracks approach and intersect the interfaces in a normal orientation. Cracks originating in the porcelain arrest at the boundaries and, after further diminution in indentation distance, deflect along the interface without penetration into the tough core ceramic. Cracks initiating in the core ceramic pass unimpeded into the weaker porcelain without deflection, and with abrupt increase in crack size. These latter cracks, because of their lack of containment within the core layer, are regarded as especially dangerous. Implications concerning the design of optimal dental crowns in relation to materials optimization are considered.

Published 7 September 2006 in J Biomed Mater Res B Appl Biomater, 79(1): 58-65.
Full-text of this article is available online (may require subscription).

© 2004-2008 Dental Research Today. All Rights Reserved.